/*               File Format and Length                               */      
PDS_VERSION_ID      = PDS3                                                    
RECORD_TYPE         = FIXED_LENGTH                                            
RECORD_BYTES        = 41                                                      
FILE_RECORDS        = 182                                                     
DATA_SET_ID         = "SUISEI-C-ESP-3-RDR-HALLEY-V1.0"                        
OBSERVATION_ID      = "UNK"                                                   
OBSERVATION_TIME    = "UNK"                                                   
START_TIME          = "UNK"                                                   
TARGET_NAME         = "HALLEY"                                                
/*               Record Pointer to Object                             */      
^TABLE              = "ESP00001.TAB"                                          
                                                                              
NOTE = "CHANGES MADE DURING FILE EDITING                                      
                                                                              
      o Several records were tagged with notes in the original dataset:       
                                                                              
          Record         Time          Note                                   
            99      3  8 14:42:30      Encounter with Halley's comet          
           121      3  8 17:50:14      failure of fitting routine             
         132-4      3  9 01:47:53ff    failure of fitting routine             
                                       (Owing to a second peak in the         
                                        proton distribution)                  
                                                                              
        The third remark was spread over three consecutive records.           
        These remarks have been removed from the data file.                   
                                                                              
      o '****' flags have been replaced with integer values (see the          
        descriptions below) to mark places where there are no density         
        or eigenvalue figures because of fitting routine failures.            
      o The format of the time field was standardized with leading            
        zeroes and colon separators.                                          
      o Several semicolons already in the time fields were converted          
        to colons.                                                            
       "                                                                      
                                                                              
/*               Description of Object in File                        */      
OBJECT              = TABLE                                                   
 ROWS               = 182                                                     
 ROW_BYTES          = 41                                                      
 INTERCHANGE_FORMAT = ASCII                                                   
 DESCRIPTION        = " ***SUISEI ESP / Solar Wind Parameters ***             
             T. Mukai   Institute of Space and Astronautical Science          
                        Sagamihara, Kanagawa 229 Japan                        
                                                                              
 M: Month        D:Day               ERT   :Earth Receive time                
                                    (SCET: Spacecraft Event Time              
                                       = ERT - 24 min )                       
                                                                              
 V: Vsw (km/s)   N:density (1/cc)    T1, T2:eigenvalues of 2D pressure tensor 
                                          (deg)                               
 "                                                                            
 NOTE               = "Created by FITS2PDS"                                   
 COLUMNS            = 11                                                      
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "MONTH"                                                 
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 1                                                       
  START_BYTE        = 1                                                       
  FORMAT            = I1                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "DAY"                                                   
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 2                                                       
  START_BYTE        = 3                                                       
  FORMAT            = I2                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "HOUR"                                                  
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 2                                                       
  START_BYTE        = 6                                                       
  FORMAT            = I2                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "TIME_SYMBOL"                                           
  DATA_TYPE         = CHARACTER                                               
  BYTES             = 1                                                       
  START_BYTE        = 8                                                       
  FORMAT            = A1                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "MIN"                                                   
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 2                                                       
  UNIT              = "MIN"                                                   
  START_BYTE        = 9                                                       
  FORMAT            = I2                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "TIME_SYMBOL"                                           
  DATA_TYPE         = CHARACTER                                               
  BYTES             = 1                                                       
  START_BYTE        = 11                                                      
  FORMAT            = A1                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "SEC"                                                   
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 2                                                       
  START_BYTE        = 12                                                      
  FORMAT            = I2                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "SOLAR_WIND_VELOCITY"                                   
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 3                                                       
  UNIT              = "KM/S"                                                  
  START_BYTE        = 16                                                      
  FORMAT            = I3                                                      
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "NUMBER_DENSITY"                                        
  DATA_TYPE         = ASCII_REAL                                              
  BYTES             = 4                                                       
  UNIT              = "CM**-3"                                                
  START_BYTE        = 20                                                      
  FORMAT            = "F4.1"                                                  
  INVALID           = -9.9                                                    
  NOTE              = "The INVALID data flag value is inserted where          
                       the fitting routine failed."                           
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "T1"                                                    
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 7                                                       
  UNIT              = "DEG"                                                   
  DESCRIPTION       = "EIGENVALUE FOR 2-D PRESSURE TENSOR"                    
  START_BYTE        = 26                                                      
  FORMAT            = I7                                                      
  INVALID           = -99999                                                  
  NOTE              = "The INVALID data flag value is inserted where          
                       the fitting routine failed."                           
 END_OBJECT                                                                   
                                                                              
 OBJECT             = COLUMN                                                  
  NAME              = "T2"                                                    
  DATA_TYPE         = ASCII_INTEGER                                           
  BYTES             = 6                                                       
  UNIT              = "DEG"                                                   
  DESCRIPTION       = "EIGENVALUE FOR 2-D PRESSURE TENSOR"                    
  START_BYTE        = 33                                                      
  FORMAT            = I6                                                      
  INVALID           = -99999                                                  
  NOTE              = "The INVALID data flag value is inserted where          
                       the fitting routine failed."                           
 END_OBJECT                                                                   
                                                                              
END_OBJECT          = TABLE                                                   
END