PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2018-03-14, IPAG, version 1.0 2018-11-22, IPAG, version 2.0, add missing cruise operations " RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RO/RL-CAL-CONSERT-3-PHC-V2.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "ROSETTA-ORBITER/ROSETTA-LANDER CAL CONSERT 3 PHC V2.0" DATA_SET_TERSE_DESC = "This data set contains the Level 3 CONSERT data referred to PHC Mission Phase" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = TABLE START_TIME = 2014-04-09T00:00:00 STOP_TIME = 2014-04-24T00:00:00 DATA_SET_RELEASE_DATE = 2012-10-09 PRODUCER_FULL_NAME = "INSTITUT DE PLANETOLOGIE ET D ASTROPHYSIQUE DE GRENOBLE" DETAILED_CATALOG_FLAG = "N" ABSTRACT_DESC = "This archive contains CALIBRATED data (CODMAC level 3) that refers to target CALIBRATION from the CONSERT instrument onboard ROSETTA Orbiter and Lander, acquired during the PHC phase. In addition to the scientific signal of interest, it contains all the values applied to the signal for calibration. It also contains documentation which describes the CONSERT experiment. The data archived in this data set conform to the Planetary Data System (PDS) Standards, Version 3.6. V2.0 of this dataset includes additional cruise operations which were missing in V1.0." ARCHIVE_STATUS = "IN QUEUE" CITATION_DESC = "A. Herique, Y. Rogez, M. Roudaud, W. Kofman, ROSETTA-ORBITER/ROSETTA-LANDER CAL CONSERT 3 PHC V2.0, RO/RL-CAL-CONSERT-3-PHC-V2.0, ESA Planetary Science Archive and NASA Planetary Data System, 2019." CONFIDENCE_LEVEL_NOTE = "Data confidence is nominal, meaning that all data have been validated by the scientific team and found as expected. Any exceptions are noted by the DATA_QUALITY_ID." DATA_SET_DESC = " Data Set Overview ================= This data set contains the Level 3 CONSERT data referred to PHC Mission Phase. Data ==== This data set contains the calibrated CONSERT signal, the ancilliary data and geometry (orbitography) data corresponding to each CONSERT measurement point. They referred to CODMAC Level 3. Processing ========== Only CODMAC Level 3 data are present in this data set. Coordinate System ================= The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator and Equinox reference frame of J2000. SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the PLANETOCENTRIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees. The geometric data, composed of Rosetta and Philae position, velocity and attitude, are provided in the Comet Fixed Frame coordinate system. Version History =============== Version 1.0: Original delivery. Version 2.0: Addition of cruise operations which were missing in V1.0. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "CALIBRATION" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = {"RO","RL"} INSTRUMENT_ID = "CONSERT" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "KOFMANETAL1998" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "HERIQUEETAL1999" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "KOFMANETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "HERIQUEETAL2015" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "KOFMANETAL2015" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "ROGEZETAL2016" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "PASQUEROETAL2016" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "HERIQUEETAL2017" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END