PDS_VERSION_ID                        = PDS3
DESCRIPTION                           = "Description of the sequence of sweep
voltage bias steps. D_SWEEP_P1_RAW_16BIT_BIP."
LABEL_REVISION_NOTE                   = "
    2018-11-12, EJ: Descriptions clean-up, lowercase
    2018-11-27, EJ: Updated global DESCRIPTIONs
    2019-02-04, EJ: Command block-->macro block"
RECORD_TYPE                           = FIXED_LENGTH
RECORD_BYTES                          = 32
FILE_RECORDS                          = 241
FILE_NAME                             = "LAP_20040907_141914_204_B1S.LBL"
^TABLE                                = "LAP_20040907_141914_204_B1S.TAB"
DATA_SET_ID                           = "RO-X-RPCLAP-3-CVP2-CALIB2-V1.0"
DATA_SET_NAME                         = "ROSETTA-ORBITER CHECK RPCLAP 3 CVP2
CALIB2 V1.0"
DATA_QUALITY_ID                       = "1"
MISSION_ID                            = ROSETTA
MISSION_NAME                          = "INTERNATIONAL ROSETTA MISSION"
MISSION_PHASE_NAME                    = "COMMISSIONING 2"
PRODUCER_INSTITUTION_NAME             = "SWEDISH INSTITUTE OF SPACE PHYSICS,
UPPSALA"
PRODUCER_ID                           = EJ
PRODUCER_FULL_NAME                    = "ERIK P G JOHANSSON"
PRODUCT_ID                            = "LAP_20040907_141914_204_B1S"
PRODUCT_TYPE                          = "RDR"
PRODUCT_CREATION_TIME                 = 2019-12-09T19:50:33.212
INSTRUMENT_HOST_ID                    = RO
INSTRUMENT_HOST_NAME                  = "ROSETTA-ORBITER"
INSTRUMENT_NAME                       = "ROSETTA PLASMA CONSORTIUM - LANGMUIR
PROBE"
INSTRUMENT_ID                         = RPCLAP
INSTRUMENT_TYPE                       = "PLASMA INSTRUMENT"
INSTRUMENT_MODE_ID                    = MCID0X0204
INSTRUMENT_MODE_DESC                  = "Density, Burst mode alternating
sweeps and time series."
TARGET_NAME                           = "CHECKOUT"
TARGET_TYPE                           = "N/A"
PROCESSING_LEVEL_ID                   = "3"
START_TIME                            = 2004-09-07T14:19:14.601
STOP_TIME                             = 2004-09-07T23:59:37.209
SPACECRAFT_CLOCK_START_COUNT          = "1/0053187538.1600"
SPACECRAFT_CLOCK_STOP_COUNT           = "1/53222360.41012"
ROSETTA:LAP_TM_RATE                   = "BURST"
ROSETTA:LAP_BOOTSTRAP                 = "ON"
ROSETTA:LAP_FEEDBACK_P1               = "DENSITY"
ROSETTA:LAP_P1_ADC20                  = "DENSITY"
ROSETTA:LAP_P1_ADC16                  = "DENSITY"
ROSETTA:LAP_P1_RANGE_DENS_BIAS        = "+-32"
ROSETTA:LAP_P1_STRATEGY_OR_RANGE      = "GAIN 1"
ROSETTA:LAP_P1_RX_OR_TX               = "ANALOG INPUT"
ROSETTA:LAP_P1_ADC16_FILTER           = "8 KHZ"
ROSETTA:LAP_P1_SWEEP_PLATEAU_DURATION = "0x0200"
ROSETTA:LAP_P1_SWEEP_STEPS            = "0x00f0"
ROSETTA:LAP_P1_SWEEP_START_BIAS       = "0x00f8"
ROSETTA:LAP_P1_SWEEP_FORMAT           = "DOWN UP"
ROSETTA:LAP_P1_SWEEP_RESOLUTION       = "COARSE"
ROSETTA:LAP_P1_SWEEP_STEP_HEIGHT      = "0x0002"
ROSETTA:LAP_P1_ADC16_DOWNSAMPLE       = "0x0080"
ROSETTA:LAP_SWEEPING_P1               = "YES"
ROSETTA:LAP_P1_FINE_SWEEP_OFFSET      = "0x0000"
^ARCHIVE_CONTENT_DESC                 = "RO-IRFU-LAP-EAICD.PDF"
^RPC_SCIENCE_USAGE_DESC               = "RPC_USER_GUIDE.PDF"
^RPCLAP_SCIENCE_USAGE_DESC            = "RO-IRFU-LAP-UG.PDF"

OBJECT = TABLE
    INTERCHANGE_FORMAT = ASCII
    ROWS               = 241
    COLUMNS            = 2
    ROW_BYTES          = 32
    DESCRIPTION        = "Table of relative time within sweep, and
corresponding voltage bias. This table is shared for all sweeps on the same
probe and is associated with the sweep data in file
LAP_20040907_141914_204_I1S.TAB."

    OBJECT = COLUMN
        NAME        = SWEEP_TIME
        START_BYTE  = 1
        BYTES       = 14
        DATA_TYPE   = ASCII_REAL
        FORMAT      = "E14.7"
        UNIT        = "SECOND"
        DESCRIPTION = "Elapsed time (s/c clock time) from first sweep
measurement."
    END_OBJECT = COLUMN

    OBJECT = COLUMN
        NAME        = P1_VOLTAGE
        START_BYTE  = 17
        BYTES       = 14
        DATA_TYPE   = ASCII_REAL
        FORMAT      = "E14.7"
        UNIT        = "VOLT"
        DESCRIPTION = "Calibrated voltage bias."
    END_OBJECT = COLUMN

END_OBJECT = TABLE

END