PDS_VERSION_ID         = PDS3                                         
LABEL_REVISION_NOTE    = "V1.0"                                       
RECORD_TYPE            = STREAM                                       
                                                                      
OBJECT                 = DATA_SET                                     
  DATA_SET_ID          = "RO-X-GIA-2-CVP2-COMMISSIONING2-V1.0"        
                                                                      
  OBJECT                           = DATA_SET_INFORMATION             
    DATA_SET_NAME                  = "                                
        ROSETTA-ORBITER CHECK GIADA 2 CVP2 COMMISSIONING2 V1.0"       
    CITATION_DESC                  = "                                
        L. Colangeli and the International GIADA Consortium,          
        RO-X-GIA-2-CVP2-COMMISSIONING2-V1.0,                          
        NASA Planetary Data System, 2007."                            
    ABSTRACT_DESC                  = "                                
        This volume contains Experiment Data acquired by GIADA during 
        'Commissioning 2' phase. More in detail it refers to the data 
        provided during the following in-flight scenarios:            
        'Interference 1' held on 20/21/22-09-2004;                    
        'Pointing 1' held on 23-09-2004;                              
        'Pointing 2' held on 30-09-2004;                              
        'Interference 2' held on 12/13/14-10-2004.                    
        It also contains documentation which describes the GIADA      
        experiment.                                                   
        The data reported in this data set have been converted from   
        ADC counts to engineering values. The quality of the          
        Housekeeping and Calibration data is good. Scientific data    
        are due to noise, as no grain event is expected during this   
        mission phase. These data must be only considered to evaluate 
        GIADA behaviour and not as real scientific data.              
        Data reported by GDS and IS are due to noise as no dust event 
        is expected during this mission phase. MBS frequency changes, 
        once normalised for frequency vs. temperature dependence,     
        if present, are due to deposition of contaminants existing in 
        the S/C environment. Housekeeping and Calibration data from   
        all GIADA sub-systems are useful to evaluate instrument       
        health and behaviour when compared with similar data acquired 
        during other mission phases."                                 
    DATA_SET_TERSE_DESC            = "                                
        Volume containing the following data from 'Commissioning 2':  
        'Interference 1' - 20/21/22-09-2004;                          
        'Pointing 1' - 23-09-2004;                                    
        'Pointing 2' - 30-09-2004;                                    
        'Interference 2' - 12/13/14-10-2004.                          
        Documentation describing the GIADA experiment is also         
        included."                                                    
    CONFIDENCE_LEVEL_NOTE          = "                                
        The data reported in this data set have been converted from   
        ADC counts to engineering values. The quality of the          
        Housekeeping and Calibration data is good. Scientific data    
        are due to noise, as no grain event is expected during this   
        mission phase. These data must be only considered to evaluate 
        GIADA behaviour and not as real scientific data.              
        See GIA_GAL_RP_518, GIA_GAL_RP_519, GIA-GAL-RP-520,           
        GIA_GAL_RP_521 and GIA_GAL_RP_522 (reported in DOCUMENT dir)  
        for evaluations on GIADA behaviour during this mission phase."
    DATA_SET_DESC                  = "                                
        The format of data reported in GIADA data sets is the same    
        for all mission phases. Data reported by GDS and IS are due   
        to noise as no dust event is expected in this mission phase.  
        MBS frequency changes, once normalised for frequency vs.      
        temperature dependence, if present, are due to deposition of  
        contaminants existing in the S/C environment. Housekeeping    
        and Calibration data from all GIADA sub-systems are useful to 
        evaluate instrument health and behaviour when compared with   
        similar data acquired during other mission phases."           
    ARCHIVE_STATUS                 = "LOCALLY ARCHIVED"                     
    DATA_OBJECT_TYPE               = TABLE                            
    DATA_SET_RELEASE_DATE          = 2009-05-01                       
    DATA_SET_COLLECTION_MEMBER_FLG = N                                
    DETAILED_CATALOG_FLAG          = N                                
    PRODUCER_FULL_NAME             = "GIADA TEAM"                     
    START_TIME                     = 2004-09-20T11:47:04.867          
/* Beginning with the first HK packet of the whole mission phase */   
    STOP_TIME                      = 2004-10-14T10:59:00.552          
/* Ending with the last HK packet of the whole mission phase  */      
  END_OBJECT                       = DATA_SET_INFORMATION             
                                                                      
  OBJECT               = DATA_SET_MISSION                             
    MISSION_NAME       = "INTERNATIONAL ROSETTA MISSION"                                     
  END_OBJECT           = DATA_SET_MISSION                             
                                                                      
  OBJECT               = DATA_SET_HOST                                
    INSTRUMENT_HOST_ID = RO                                           
    INSTRUMENT_ID      = GIADA                                        
  END_OBJECT           = DATA_SET_HOST                                
                                                                      
  OBJECT               = DATA_SET_TARGET                              
    TARGET_NAME        = CHECKOUT                                     
  END_OBJECT           = DATA_SET_TARGET                              
                                                                      
  OBJECT               = DATA_SET_REFERENCE_INFORMATION               
    REFERENCE_KEY_ID   = "COLANGELIETAL2007"                          
  END_OBJECT           = DATA_SET_REFERENCE_INFORMATION               
                                                                      
END_OBJECT             = DATA_SET                                     
                                                                      
END