PDS_VERSION_ID                        = PDS3
DESCRIPTION                           = "Description of the sequence of sweep
voltage bias steps. D_SWEEP_P1_RAW_16BIT_BIP."
LABEL_REVISION_NOTE                   = "
    2018-11-12, EJ: Descriptions clean-up, lowercase
    2018-11-27, EJ: Updated global DESCRIPTIONs
    2019-02-04, EJ: Command block-->macro block"
RECORD_TYPE                           = FIXED_LENGTH
RECORD_BYTES                          = 32
FILE_RECORDS                          = 243
FILE_NAME                             = "LAP_20070223_003534_600_B1S.LBL"
^TABLE                                = "LAP_20070223_003534_600_B1S.TAB"
DATA_SET_ID                           = "RO-M-RPCLAP-2-MARS-EDITED2-V1.0"
DATA_SET_NAME                         = "ROSETTA-ORBITER MARS RPCLAP 2 MARS
EDITED2 V1.0"
DATA_QUALITY_ID                       = "1"
MISSION_ID                            = ROSETTA
MISSION_NAME                          = "INTERNATIONAL ROSETTA MISSION"
MISSION_PHASE_NAME                    = "MARS SWING-BY"
PRODUCER_INSTITUTION_NAME             = "SWEDISH INSTITUTE OF SPACE PHYSICS,
UPPSALA"
PRODUCER_ID                           = EJ
PRODUCER_FULL_NAME                    = "ERIK P G JOHANSSON"
PRODUCT_ID                            = "LAP_20070223_003534_600_B1S"
PRODUCT_TYPE                          = "EDR"
PRODUCT_CREATION_TIME                 = 2019-10-01T17:13:14.652
INSTRUMENT_HOST_ID                    = RO
INSTRUMENT_HOST_NAME                  = "ROSETTA-ORBITER"
INSTRUMENT_NAME                       = "ROSETTA PLASMA CONSORTIUM - LANGMUIR
PROBE"
INSTRUMENT_ID                         = RPCLAP
INSTRUMENT_TYPE                       = "PLASMA INSTRUMENT"
INSTRUMENT_MODE_ID                    = MCID0X0600
INSTRUMENT_MODE_DESC                  = "As MCID0x212 but with 20 V bias and
8KHz filters"
TARGET_NAME                           = "MARS"
TARGET_TYPE                           = "PLANET"
PROCESSING_LEVEL_ID                   = "2"
START_TIME                            = 2007-02-23T00:35:34.907
STOP_TIME                             = 2007-02-23T01:05:28.279
SPACECRAFT_CLOCK_START_COUNT          = "1/0130811706.1600"
SPACECRAFT_CLOCK_STOP_COUNT           = "1/130813499.25990"
ROSETTA:LAP_TM_RATE                   = "NORMAL"
ROSETTA:LAP_BOOTSTRAP                 = "ON"
ROSETTA:LAP_FEEDBACK_P1               = "DENSITY"
ROSETTA:LAP_P1_ADC20                  = "DENSITY"
ROSETTA:LAP_P1_ADC16                  = "DENSITY"
ROSETTA:LAP_P1_RANGE_DENS_BIAS        = "+-32"
ROSETTA:LAP_P1_STRATEGY_OR_RANGE      = "GAIN 1"
ROSETTA:LAP_P1_RX_OR_TX               = "ANALOG INPUT"
ROSETTA:LAP_P1_ADC16_FILTER           = "8 KHZ"
ROSETTA:LAP_P1_SWEEP_PLATEAU_DURATION = "0x0200"
ROSETTA:LAP_P1_SWEEP_STEPS            = "0x0030"
ROSETTA:LAP_P1_SWEEP_START_BIAS       = "0x00c0"
ROSETTA:LAP_P1_SWEEP_FORMAT           = "DOWN"
ROSETTA:LAP_P1_SWEEP_RESOLUTION       = "COARSE"
ROSETTA:LAP_P1_SWEEP_STEP_HEIGHT      = "0x0004"
ROSETTA:LAP_P1_ADC16_DOWNSAMPLE       = "0x0080"
ROSETTA:LAP_SWEEPING_P1               = "YES"
ROSETTA:LAP_P1_FINE_SWEEP_OFFSET      = "0x0000"
^ARCHIVE_CONTENT_DESC                 = "RO-IRFU-LAP-EAICD.PDF"
^RPC_SCIENCE_USAGE_DESC               = "RPC_USER_GUIDE.PDF"
^RPCLAP_SCIENCE_USAGE_DESC            = "RO-IRFU-LAP-UG.PDF"

OBJECT = TABLE
    INTERCHANGE_FORMAT = ASCII
    ROWS               = 243
    COLUMNS            = 2
    ROW_BYTES          = 32
    DESCRIPTION        = "Table of relative time within sweep, and
corresponding voltage bias. This table is shared for all sweeps on the same
probe and is associated with the sweep data in file
LAP_20070223_003534_600_I1S.TAB."

    OBJECT = COLUMN
        NAME             = SWEEP_TIME
        START_BYTE       = 1
        BYTES            = 14
        DATA_TYPE        = ASCII_REAL
        FORMAT           = "E14.7"
        UNIT             = "SECOND"
        DESCRIPTION      = "Elapsed time (s/c clock time) from first sweep
measurement. Negative time refers to samples taken just before the actual
sweep for technical reasons. A value of -1e+09 refers to that there was no
such pre-sweep sample for any sweep in this macro block."
        MISSING_CONSTANT = -1.000000E+09
    END_OBJECT = COLUMN

    OBJECT = COLUMN
        NAME             = P1_VOLTAGE
        START_BYTE       = 17
        BYTES            = 14
        DATA_TYPE        = ASCII_INTEGER
        FORMAT           = "I14"
        UNIT             = "N/A"
        DESCRIPTION      = "Bias voltage. A value of -1e+09 refers to that the
bias voltage is unknown (all pre-sweep bias voltages)."
        MISSING_CONSTANT = -1.000000E+09
    END_OBJECT = COLUMN

END_OBJECT = TABLE

END