PDS_VERSION_ID = PDS3 DESCRIPTION = "Description of the sequence of sweep voltage bias steps. D_SWEEP_P2_RAW_16BIT_BIP." LABEL_REVISION_NOTE = " 2018-11-12, EJ: Descriptions clean-up, lowercase 2018-11-27, EJ: Updated global DESCRIPTIONs 2019-02-04, EJ: Command block-->macro block" RECORD_TYPE = FIXED_LENGTH RECORD_BYTES = 32 FILE_RECORDS = 145 FILE_NAME = "LAP_20140904_230256_506_B2S.LBL" ^TABLE = "LAP_20140904_230256_506_B2S.TAB" DATA_SET_ID = "RO-C-RPCLAP-2-PRL-EDITED2-V1.0" DATA_SET_NAME = "ROSETTA-ORBITER 67P RPCLAP 2 PRL EDITED2 V1.0" DATA_QUALITY_ID = "1" MISSION_ID = ROSETTA MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" MISSION_PHASE_NAME = "PRELANDING" PRODUCER_INSTITUTION_NAME = "SWEDISH INSTITUTE OF SPACE PHYSICS, UPPSALA" PRODUCER_ID = EJ PRODUCER_FULL_NAME = "ERIK P G JOHANSSON" PRODUCT_ID = "LAP_20140904_230256_506_B2S" PRODUCT_TYPE = "EDR" PRODUCT_CREATION_TIME = 2019-09-29T21:55:29.865 INSTRUMENT_HOST_ID = RO INSTRUMENT_HOST_NAME = "ROSETTA-ORBITER" INSTRUMENT_NAME = "ROSETTA PLASMA CONSORTIUM - LANGMUIR PROBE" INSTRUMENT_ID = RPCLAP INSTRUMENT_TYPE = "PLASMA INSTRUMENT" INSTRUMENT_MODE_ID = MCID0X0506 INSTRUMENT_MODE_DESC = "Density 20 bit down 128, 16 bit P1 & P2 and Sweep every 5th AQP" TARGET_NAME = "67P/CHURYUMOV-GERASIMENKO 1 (1969 R1)" TARGET_TYPE = "COMET" PROCESSING_LEVEL_ID = "2" START_TIME = 2014-09-04T23:03:28.433 STOP_TIME = 2014-09-04T23:59:29.799 SPACECRAFT_CLOCK_START_COUNT = "1/0368492539.15680" SPACECRAFT_CLOCK_STOP_COUNT = "1/368495900.39622" ROSETTA:LAP_TM_RATE = "NORMAL" ROSETTA:LAP_BOOTSTRAP = "ON" ROSETTA:LAP_FEEDBACK_P2 = "DENSITY" ROSETTA:LAP_P2_ADC20 = "DENSITY" ROSETTA:LAP_P2_ADC16 = "DENSITY" ROSETTA:LAP_P2_RANGE_DENS_BIAS = "+-32" ROSETTA:LAP_P2_STRATEGY_OR_RANGE = "GAIN 1" ROSETTA:LAP_P2_RX_OR_TX = "ANALOG INPUT" ROSETTA:LAP_P2_ADC16_FILTER = "8 KHZ" ROSETTA:LAP_P2_SWEEP_PLATEAU_DURATION = "0x0200" ROSETTA:LAP_P2_SWEEP_STEPS = "0x0030" ROSETTA:LAP_P2_SWEEP_START_BIAS = "0x00b0" ROSETTA:LAP_P2_SWEEP_FORMAT = "DOWN" ROSETTA:LAP_P2_SWEEP_RESOLUTION = "COARSE" ROSETTA:LAP_P2_SWEEP_STEP_HEIGHT = "0x0002" ROSETTA:LAP_P2_ADC16_DOWNSAMPLE = "0x0100" ROSETTA:LAP_SWEEPING_P2 = "YES" ROSETTA:LAP_P2_FINE_SWEEP_OFFSET = "0x0000" ^ARCHIVE_CONTENT_DESC = "RO-IRFU-LAP-EAICD.PDF" ^RPC_SCIENCE_USAGE_DESC = "RPC_USER_GUIDE.PDF" ^RPCLAP_SCIENCE_USAGE_DESC = "RO-IRFU-LAP-UG.PDF" OBJECT = TABLE INTERCHANGE_FORMAT = ASCII ROWS = 145 COLUMNS = 2 ROW_BYTES = 32 DESCRIPTION = "Table of relative time within sweep, and corresponding voltage bias. This table is shared for all sweeps on the same probe and is associated with the sweep data in file LAP_20140904_230256_506_I2S.TAB." OBJECT = COLUMN NAME = SWEEP_TIME START_BYTE = 1 BYTES = 14 DATA_TYPE = ASCII_REAL FORMAT = "E14.7" UNIT = "SECOND" DESCRIPTION = "Elapsed time (s/c clock time) from first sweep measurement. Negative time refers to samples taken just before the actual sweep for technical reasons. A value of -1e+09 refers to that there was no such pre-sweep sample for any sweep in this macro block." MISSING_CONSTANT = -1.000000E+09 END_OBJECT = COLUMN OBJECT = COLUMN NAME = P2_VOLTAGE START_BYTE = 17 BYTES = 14 DATA_TYPE = ASCII_INTEGER FORMAT = "I14" UNIT = "N/A" DESCRIPTION = "Bias voltage. A value of -1e+09 refers to that the bias voltage is unknown (all pre-sweep bias voltages)." MISSING_CONSTANT = -1.000000E+09 END_OBJECT = COLUMN END_OBJECT = TABLE END