PDS_VERSION_ID = PDS3
RECORD_TYPE = STREAM
PRODUCT_ID = "SOFTWARE"
DATA_SET_ID            = "RO-C-RPCICA-2-ESC3-RAW-V1.0"
PRODUCT_CREATION_TIME  = 2016-03-30T10:02:19
OBJECT = TEXT
   PUBLICATION_DATE = 2006-09-07
   NOTE = "
    This file describes the content of the SOFTWARE directory. The main
    purpose is to show the user an example on how the PDS ascii file can
    be read. The script  READICA2.m will ask for a date, and tries to load
    all available files for that date. A variable icapath is available,
    which should point to the directory containing data, i.e. /DATA/EDITED/
    in the PDS data structure of the current mission phase archive.
    The script reads both Normal and Burst mode data. PLOT_NRM.m is an
    example on how to use Normal mode data. It will plot data in the
    current matlab workspace. Note though, that the original mass lookup
    table does not fully correspond to the masses indicated. This is
    because the original energy table had an offset which made it
    mismatched with the mass look up table. "
END_OBJECT = TEXT
END
***** File SOFTINFO.TXT

SOFTINFO.TXT      This file

ICAINITIALIZE.M   Matlab script to initialize the ICA workspace.
ICAINITIALIZE.LBL -PDS Text Label to ICAINITIALIZE.M

ICALOOKUP0V1.DAT  Data file Lookup Table 0 for ICA.
ICALOOKUP0V1.LBL  -PDS Text Label to ICALOOKUP0V1.DAT
ICALOOKUP1V1.DAT  Data file Lookup Table 1 for ICA.
ICALOOKUP1V1.LBL  -PDS Text Label to ICALOOKUP1V1.DAT
ICALOOKUP2V1.DAT  Data file Lookup Table 2 for ICA.
ICALOOKUP2V1.LBL  -PDS Text Label to ICALOOKUP2V1.DAT

ICAV1.DAT      Main Datafile for ICA. DflLev DfLV DfUV ESC_L ESC_H_ref Eion
ICAV1.LBL      -PDS Text Label to ICAV1.DAT

PLOT_NRM.M     Matlab script for ICA mass lookup table plot.
PLOT_NRM.LBL   -PDS Text Label to PLOT_NRM.M
READICA2.M     Matlab script to read ICA data for one day.
READICA2.LBL   -PDS Text Label to READICA2.M