#=======================================================================================# # Filename: OIOR_PI6RSO_D_0003_MR_DI001_00011.ROS # Type: Orbiter Instrument Operation Request file # # Description: OIOR for MIRO in the Deep Impact observation, Planning Cycle 3 (POR2) # # Author: Lucas Kamp # # Verified by: syntax verified by EPS itl # # (c) ESA/Estec # #---------------------------------------------------------------------------------------# # V0008 2005/05/18 LKamp: kept LNA-off sequence as is, despite EPS errors # V0007 2005/05/21 RSOC: initial mode is CTS_DualCntm; fixed some minor errors # V0006 2005/05/18 LKamp: moved up mode-change cmd before Impact jailbar to include # AL/MR cooperative stare; changed timing of SMM LNA-off cmds, # added 3 more, preceded by decrease of CTS int.time; split off # OIOR for planning cycle 3, updated internal filenames. # V0005 2005/05/17 RSOC: Added [RAW] after all four parameter values of AMRS614A for # each call of AMRS614A. EPS requires [RAW] or [ENG] if both # types are defined. # V0004 2005/05/14 LKamp: added mode change with increased CTS integration before # first jailbar in order to cut data volume; removed LNA off # commands at start of the observation. # V0003 2005/05/10 RSOC: made first 41 & last 77 jailbars uniform; fixed offset of # repeated mode change & expanded earliest/latest margins; # added distinction between POR1 & POR2; split some description # lines of excessive length; corrected typos. # revision 1.1 2005/05/08 LKamp: moved first LNA-off up, added a mode change right before # SMM off; separated repeated mode change command for # standard jailbars before and after impact; added mode # change for impact jailbar and first standard jailbars. # # Version: 1.0 # Reference: EVF_MAN_DEEP_IMPACT_OBSERVATION.EVF # Date: 04 May 2005 # Comment: # #=======================================================================================# Version: 00003 Ref_date: 31-Dec-2004 Start_time: 165_00:00:00 End_time: 210_00:00:00 Init_Mode: MIRO CTS_DualCntm #=======================================================================================# Description: "8. | Here are the mode change commands for the 50 standard jailbars after" Description: " | Planning Cycle 2 (numbering is continued from that point)." #=======================================================================================# POINTING_START(MAX_NR=50 EARLIEST=188_18:30:00 LATEST=195_02:30:00) -00:02:00 \ MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 POINTING_START(MAX_NR=50 EARLIEST=188_18:30:00 LATEST=195_02:30:00) +01:36:00 MIRO CTS_DualCntm AMRF011A #CTS/Dual Continuum #=======================================================================================# Description: "9. | Decrease the CTS integration time during the WOL windows." #=======================================================================================# POINTING_START (COUNT=005038) +02:58:00 MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 #=======================================================================================# Description: "10.| Issue some LNA off commands at end, in order to measure background." Description: " | The CTS integration time is decreased just before the first SMM off," Description: " | and a Mode Change is done just after each one in order to get a cal." Description: " | At the end, we go back to the increased integration time." #=======================================================================================# POINTING_START (COUNT=007001) 00:15:00 MIRO CTS_DualCntm AMRF031A # MM LNA Power Off POINTING_START (COUNT=007001) 00:20:00 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum POINTING_START (COUNT=007001) 00:25:00 MIRO CTS_DualCntm AMRF032A # SMM LNA Power Off POINTING_START (COUNT=007001) 00:25:05 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum POINTING_START (COUNT=007001) 00:30:00 MIRO CTS_DualCntm AMRF032A # SMM LNA Power Off POINTING_START (COUNT=007001) 00:30:05 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum POINTING_START (COUNT=007001) 00:35:00 MIRO CTS_DualCntm AMRF032A # SMM LNA Power Off POINTING_START (COUNT=007001) 00:35:05 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum POINTING_START (COUNT=007001) 00:40:00 MIRO CTS_DualCntm AMRF032A # SMM LNA Power Off POINTING_START (COUNT=007001) 00:40:05 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum POINTING_START (COUNT=007001) 00:45:00 MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 #=======================================================================================# Description: "11.| Switch MIRO off." #=======================================================================================# SCEN_END (COUNT=001001) -11:35:00 MIRO CTS_DualCntm AMRF016A # Engineering SCEN_END (COUNT=001001) -11:30:00 MIRO Engineering AMRF003A # Power Off MIRO via OBCP # ----------------- End of MIRO Sequence -------------------- #