#=======================================================================================# # Filename: OIOR_PI6RSO_D_0002_MR_DI001_00010.ROS # Type: Orbiter Instrument Operation Request file # # Description: OIOR for MIRO in the Deep Impact observation, Planning Cycle 2 (POR1) # # Author: Lucas Kamp # # Verified by: syntax verified by EPS itl # # (c) ESA/Estec # #---------------------------------------------------------------------------------------# # V0006 2005/05/18 LKamp: moved up mode-change cmd before Impact jailbar to include # AL/MR cooperative stare; changed timing of SMM LNA-off cmds, # added 3 more, preceded by decrease of CTS int.time; split off # OIOR for planning cycle 3, updated internal filenames. # V0005 2005/05/17 RSOC: Added [RAW] after all four parameter values of AMRS614A for # each call of AMRS614A. EPS requires [RAW] or [ENG] if both # types are defined. # V0004 2005/05/14 LKamp: added mode change with increased CTS integration before # first jailbar in order to cut data volume; removed LNA off # commands at start of the observation. # V0003 2005/05/10 RSOC: made first 41 & last 77 jailbars uniform; fixed offset of # repeated mode change & expanded earliest/latest margins; # added distinction between POR1 & POR2; split some description # lines of excessive length; corrected typos. # revision 1.1 2005/05/08 LKamp: moved first LNA-off up, added a mode change right before # SMM off; separated repeated mode change command for # standard jailbars before and after impact; added mode # change for impact jailbar and first standard jailbars. # # Version: 1.0 # Reference: EVF_MAN_DEEP_IMPACT_OBSERVATION.EVF # Date: 04 May 2005 # Comment: # #=======================================================================================# Version: 00003 Ref_date: 31-Dec-2004 Start_time: 165_00:00:00 End_time: 210_00:00:00 Init_Mode: MIRO OFF #---------------------------------------------------------------------------------------# Description: "1. | Turn on MIRO and do initial warmup." #---------------------------------------------------------------------------------------# SCEN_START (COUNT=001001) -02:20:00 MIRO OFF AMRF001A # Power On MIRO via OBCP SCEN_START (COUNT=001001) -02:15:10 MIRO Engineering AMRF008A # "MIRO USO ON v06" SCEN_START (COUNT=001001) -02:15:05 MIRO Engineering AMRF007A # "MIRO Cal Heat On v04" SCEN_START (COUNT=001001) -02:15:00 MIRO Engineering AMRF009A # CTS Warmup #=======================================================================================# Description: "2. | Change the HK Cycle Skip to prevent interference with CTS timing." #=======================================================================================# SCEN_START (COUNT=001001) -01:00:00 MIRO Engineering AMRS624A(\ # Miro Eng data slw VMRG0030 = 5) # Eng_HK_Cycle_Skip #=======================================================================================# Description: "3. | Turn on the detectors." #=======================================================================================# SCEN_START (COUNT=001001) -00:15:00 MIRO Engineering AMRF011A # CTS/Dual Continuum #=======================================================================================# Description: "4. | For each jailbar set, issue a mode change cmd to increase the CTS" Description: " | integration 2 minutes before the first bar (C) and another to reset" Description: " | this and to trigger a cal 2 minutes before last bar (A)." Description: " | Here are the commands for the 41 standard jailbars before the impact" Description: " | event:" #=======================================================================================# POINTING_START(MAX_NR=41 EARLIEST=179_22:45:00 LATEST=185_03:45:00) -00:02:00 \ MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 POINTING_START(MAX_NR=41 EARLIEST=179_22:45:00 LATEST=185_03:45:00) +01:36:00 MIRO CTS_DualCntm AMRF011A #CTS/Dual Continuum #=======================================================================================# Description: "5. | Here is the mode change command for the AL/MR Coop-stare and impact" Description: " | jailbar:" #=======================================================================================# POINTING_START(COUNT=401001) -00:02:00 MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 POINTING_START(COUNT=402005) -00:02:00 MIRO CTS_DualCntm AMRF011A # CTS/Dual Continuum #=======================================================================================# Description: "6. | Here are the mode change commands for the 27 standard jailbars after" Description: " | the impact event." #=======================================================================================# POINTING_START(MAX_NR=27 EARLIEST=185_07:10:00 LATEST=188_17:30:00) -00:02:00 \ MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 POINTING_START(MAX_NR=27 EARLIEST=185_07:10:00 LATEST=188_17:30:00) +01:36:00 MIRO CTS_DualCntm AMRF011A #CTS/Dual Continuum #=======================================================================================# Description: "7. | Decrease the CTS integration times during the WOL windows." #=======================================================================================# POINTING_START(COUNT=001030) +02:58:00 MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 POINTING_START(COUNT=003026) +02:58:00 MIRO CTS_DualCntm AMRS614A(\ # Change Mode VMRD2001 = 1 [RAW]\ # Power_Mode = CTS/DualCntm VMRD2002 = 1 [RAW]\ # CTS_Integration_Period = 60 sec VMRD2003 = 0 [RAW]\ # Continuum_Sum_Value = Sum 1 VMRD2004 = 0 [RAW]) # CTS_Smoothing_Value = Smooth 1 # ----------------- End of MIRO Sequence -------------------- #