# $Log: OIOR_PI6RSO_D_0018_MR_05____.ITL,v $
#
# Initial OIOR for Second Lutetia Asteroid mode sequence - 2010/03/13 - L.Kamp
#
#=======================================================================================#
# Filename:     OIOR_PI6RSO_D_0018_MR_05____vvvvv.ROS
# Type:         Orbiter Instrument Operation Request file
#
# Description:  Dark-sky observation after the Lutetia encounter
#
# Author:       Lucas Kamp
#
#               JPL
#
# Date:         13 Mar 2010
#
# (c) ESA/Estec
#
#=======================================================================================#

Version: 00001

Ref_date: 01-Jan-2000  # Irrelevant because will be overridden by top-level ITL, but needed for ORFA.

Start_time:  000_00:00:00
End_time:   +000_02:30:00
# Init_Mode:        MIRO       CTS_DualCntm

#---------------------------------------------------------------------------------------#
Description: "1. | MR02 ended with Disable Science, so start with Enable Science."
Description: "   | Assume MIRO is fully warmed up, because it was not turned off in"
Description: "   | preceding observation."
#---------------------------------------------------------------------------------------#

 00:00:00 MIRO CTS_DualCntm AMRS631A                        # Enable Science

#---------------------------------------------------------------------------------------#
Description: "2. | Turn LNAs off and do a calibration."
#---------------------------------------------------------------------------------------#

+00:10:00 MIRO CTS_DualCntm AMRF011A                        # CTS/Dual Continuum

+00:20:00 MIRO CTS_DualCntm AMRS603A( \                     # MM LNA Power v02
                              VMRG0009 = 0 [RAW])           # mm_LNA_Power OFF

+00:20:05 MIRO CTS_DualCntm AMRS604A( \                     # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])           # Submm_LNA_Power OFF

+00:22:00 MIRO CTS_DualCntm AMRF011A                        # CTS/Dual Continuum

+00:27:00 MIRO CTS_DualCntm AMRS603A( \                     # MM LNA Power v02
                              VMRG0009 = 1 [RAW])           # mm_LNA_Power ON

+00:27:05 MIRO CTS_DualCntm AMRS604A( \                     # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])           # Submm_LNA_Power ON

#---------------------------------------------------------------------------------------#
Description: "3. | Turn MIRO off."
#---------------------------------------------------------------------------------------#

+02:26:00 MIRO CTS_DualCntm AMRF016A                        # Engineering

+02:30:00 MIRO Engineering AMRF003A                         # Power Off MIRO via OBCP