# $Log: OIOR_PI6RSO_D_0012_MR_05____.ITL,v $
#
# Revision 1.2  2008/04/09 18:53:16  kwirth
# Checked and modified by K.R. Wirth on 9 Apr 2008.
#
# Revision 1.1  2008/04/09 11:20:47  kwirth
# Preliminary Steins MR05 OIOR sent by L. Kamp via e-mail on 8 Apr 2008.
#
# Revised to make use of Disable/Enable Science commands - 2008/04/08  - LK
#
# Initial OIOR for Second Steins Asteroid mode sequence - 2008/04/07 - L.Kamp
#
#=======================================================================================#
# Filename:     OIOR_PI6RSO_D_0012_MR_03____vvvvv.ROS
# Type:         Orbiter Instrument Operation Request file
#
# Description:  Second (dark-sky) Asteroid mode observations for the Steins encounter
#
# Author:       Lucas Kamp
#
#               JPL
#
# Date:         07 Apr 2008
#
# (c) ESA/Estec
#
#=======================================================================================#

Version: 00001

Ref_date: 01-Jan-2000  # Irrelevant because will be overridden by top-level ITL, but needed for ORFA.

Start_time: -000_00:13:00

End_time:   +000_03:05:00

# Init_Mode:        MIRO       CTS_DualCntm
# Zero point of the relative times is the time specified by the Astrd_Mode_1_StartTime
# parameter of the Asteroid Mode command.

#---------------------------------------------------------------------------------------#
Description: "1. | MR04 ended with Disable Science, so start with Enable Science."
Description: "   | Assume MIRO is fully warmed up, because it was not turned off in"
Description: "   | preceding observation."
#---------------------------------------------------------------------------------------#

-00:13:00 MIRO CTS_DualCntm AMRS631A                        # Enable Science

#---------------------------------------------------------------------------------------#
Description: "1. | Prepare for Asteroid Mode."
#---------------------------------------------------------------------------------------#

-00:08:00 MIRO CTS_DualCntm AMRF500A( \                      # "MIRO Asteroid Obs v05" 
                             VMRG2501 = 2008.250.01.30.00 \ # Astrd_Mode_1_StartTime_
                             VMRD2502 = 45 \                # Execution_Time
                             VMRD2503 = 1 [RAW])            # Starting_LO_Frequency

-00:07:00 MIRO CTS_DualCntm AMRF013A                         # "Mode Dual Continuum v05"

-00:05:00 MIRO DualContinuum AMRF009A                       # "CTS Warm-up v06"

#---------------------------------------------------------------------------------------#
Description: "2. | Perform first Asteroid mode observation, which is done automatically."
Description: "   | This starts at the time specified by parameter VMRG2501 of AMRF500A"
Description: "   | and lasts for 8.0 minutes, preceded and followed by calibrations of"
Description: "   | 2.3 minutes each."
Description: "   | At the end (time +00:12:36), MIRO is automatically switched to"
Description: "   | DualContinuum mode."
#---------------------------------------------------------------------------------------#

#---------------------------------------------------------------------------------------#
Description: "3. | Switch to CTS/DualCont mode for LNA Off sequence."
#---------------------------------------------------------------------------------------#

+00:14:00 MIRO DualContinuum AMRF011A                       # CTS/Dual Continuum

#---------------------------------------------------------------------------------------#
Description: "4. | Turn LNAs off and do a calibration."
#---------------------------------------------------------------------------------------#

+00:20:00 MIRO CTS_DualCntm AMRS603A( \                     # MM LNA Power v02
                              VMRG0009 = 0 [RAW])           # mm_LNA_Power OFF

+00:20:05 MIRO CTS_DualCntm AMRS604A( \                     # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])           # Submm_LNA_Power OFF

+00:22:00 MIRO CTS_DualCntm AMRF011A                        # CTS/Dual Continuum

+00:27:00 MIRO CTS_DualCntm AMRS603A( \                     # MM LNA Power v02
                              VMRG0009 = 1 [RAW])           # mm_LNA_Power ON

+00:27:05 MIRO CTS_DualCntm AMRS604A( \                     # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])           # Submm_LNA_Power ON

#---------------------------------------------------------------------------------------#
Description: "5. | After MR05 data have been played out, turn MIRO off."
#---------------------------------------------------------------------------------------#

+03:00:00 MIRO CTS_DualCntm AMRF016A                        # Engineering

+03:04:00 MIRO Engineering AMRF003A                         # Power Off MIRO via OBCP