# $Log: OIOR_PI6RSO_D_0017_MR_02____.ITL,v $
#
# Revision 1.3  2010/03/06 lkamp
# Run this sequence with old patch (AMRF001B) only.
#
# Revision 1.2  2010/02/16 18:45:34  kwirth
# Commented out unknown patch sequence.
#
# Revision 1.1  2010/02/08 16:15:37  kwirth
# Preliminary OIOR for MR02 in Active PC12 sent by Lucas Kamp via e-mail on 8 Feb 2010.
#
#
# 2010/02/08 lkamp - new OIOR
#
#=======================================================================================#
# Filename: 	OIOR_PI6RSO_D_0017_MR_MR02__xxxxx.ROS      
# Type:  	Input Timeline file      
#          
# Description: 	determine noise figure of the SMM IFP
#    
# Author: 	L.Kamp
#		JPL
# Date:		8 February 2010
#
# (c) ESA/Estec  
#   
#---------------------------------------------------------------------------------------#
#=======================================================================================#

Version: 00001

Ref_date: 01-Jan-2000 # Irrelevant because will be overridden by top-level ITL, but needed for ORFA.

Start_time: 000_00:00:00
End_time: 000_01:48:00

#=======================================================================================#
# Description: "1.   | Startup" 
#=======================================================================================#

+000_00:00:00	   MIRO   OFF           AMRF001A # Power On MIRO via OBCP

+000_00:02:00      MIRO   Engineering   AMRF001B # MIRO Patch #1

+000_00:03:00      MIRO   Engineering   AMRS613A # Software Restart 

#=======================================================================================#
# Description: "2.   | minimal CTS warmup (30 min)" 
#=======================================================================================#

+000_00:06:00      MIRO  Engineering   AMRF008A # "MIRO USO ON v06"

+000_00:09:00      MIRO  Engineering   AMRF007A # "MIRO Cal Heat On v04"

+000_00:12:00      MIRO  Engineering   AMRF009A # "MIRO CTS Warm-up v06"

#=======================================================================================#
# Description: "3.   | Start tests" 
# Description: "     | Do mode change to trigger cal after 31 min" 
#=======================================================================================#

+000_00:42:00      MIRO   Engineering   AMRF012A     # "Mode SMM/Contin"

+000_00:47:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

+000_00:52:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])    # Submm_LNA_Power ON

+000_00:57:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

+000_01:02:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])    # Submm_LNA_Power ON

+000_01:07:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

+000_01:12:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])    # Submm_LNA_Power ON

+000_01:13:00      MIRO   CTS_SMMCntm   AMRF012A     # "Mode SMM/Contin"

+000_01:19:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

+000_01:24:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])    # Submm_LNA_Power ON

+000_01:29:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

+000_01:34:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 1 [RAW])    # Submm_LNA_Power ON

+000_01:39:00      MIRO   CTS_SMMCntm   AMRS604A( \  # Submm LNA Power v02
                              VMRG0010 = 0 [RAW])    # Submm_LNA_Power OFF

#=======================================================================================#
# Description: "4.   | Power off"
#=======================================================================================#

+000_01:44:00      MIRO   CTS_SMMCntm   AMRF016A # Engineering

+000_01:48:00	   MIRO   Engineering   AMRF003A # Power Off MIRO via OBCP

#=======================================END=============================================#