PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2015-09-02, SONC, initial release;" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RL-CAL-SD2-3-PDCS-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "ROSETTA-LANDER CAL SD2 3 PDCS V1.0" DATA_SET_TERSE_DESC = "This data set contains the calibrated data referred to PDCS mission phase" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = TABLE START_TIME = 2014-07-14T01:35:41.901 STOP_TIME = 2014-10-17T18:55:17.552 DATA_SET_RELEASE_DATE = 2015-09-02 PRODUCER_FULL_NAME = "SCIENCE OPERATIONS AND NAVIGATION CENTER" DETAILED_CATALOG_FLAG = "N" ABSTRACT_DESC = "This archive contains calibrated data and telemetry data from the SD2 instrument onboard ROSETTA Lander, acquired during the PDCS mission phase (Pre Delivery Calib Science). It also contains documentation which describes the SD2 experiment. The data archived in this data set conform to the Planetary Data System (PDS) Standards, Version 3.6." ARCHIVE_STATUS = "IN QUEUE" CITATION_DESC = "A. Ercoli Finzi, E. Re, P. Bologna and F. Malnati, ROSETTA-LANDER CAL SD2 3 PDCS V1.0, RL-CAL-SD2-3-PDCS-V1.0, ESA Planetary Science Archive and NASA Planetary Data System, 2018." CONFIDENCE_LEVEL_NOTE = "Data confidence is nominal, meaning that all data have been validated by the scientific team and found as expected. Any exceptions are noted by the DATA_QUALITY_ID. Moreover the data set underwent a successful external review" DATA_SET_DESC = " Data Set Overview ================= This data set contains the data referred to PDCS Mission Phase Data ==== Both data, scientific and housekeeping, are collected in this data set. They referred to CODMAC Level 3. Processing ========== This data set contains telemetry data (CODMAC level 1) as well as calibrated data (CODMAC level 3). Coordinate System ================= The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator and Equinox reference frame of J2000. SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the PLANETOCENTRIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "CALIBRATION" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "RL" INSTRUMENT_ID = "SD2" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "ERCOLIFINZIETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END