PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2004-11-21, XXX, initial release;" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RL-CAL-ROMAP-3-CR4B-SPM-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "ROSETTA-LANDER CAL ROMAP 3 CR4B SPM V1.0" DATA_SET_TERSE_DESC = "This data set contains the data referred to CR4B Mission Phase" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = TABLE START_TIME = 2008-10-18T06:26:47.488 STOP_TIME = 2009-02-01T15:25:46.788 DATA_SET_RELEASE_DATE = 2012-10-09 PRODUCER_FULL_NAME = "SCIENCE OPERATIONS AND NAVIGATION CENTER" DETAILED_CATALOG_FLAG = "N" ABSTRACT_DESC = "This archive contains level 3 data from the ROMAP SPM instrument onboard ROSETTA Lander, acquired during the CR4B (cruise 4B) phase. It also contains documentation which describes the ROMAP experiment. The data archived in this data set conform to the Planetary Data System (PDS) Standards, Version 3.6." ARCHIVE_STATUS = "IN QUEUE" CITATION_DESC = "H.U. Auster, I. Apathy, G. Berghofer, A. Remizov and R. Roll, ROSETTA-LANDER CAL ROMAP 3 CR4B SPM V1.0, RL-CAL-ROMAP-3-CR4B-SPM-V1.0, ESA Planetary Science Archive and NASA Planetary Data System, 2020." CONFIDENCE_LEVEL_NOTE = "Data confidence is nominal, meaning that all data have been validated by the scientific team and found as expected. Any exceptions are noted by the DATA_QUALITY_ID." DATA_SET_DESC = " Data Set Overview ================= This data set contains the data referred to CR4B Mission Phase Data ==== Both data, scientific and housekeeping, are collected in this data set. They referred to CODMAC Level 3. Processing ========== Only CODMAC Level 3 data are present in this data set Coordinate System ================= The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator and Equinox reference frame of J2000. SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the PLANETOCENTRIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_TARGET TARGET_NAME = "CALIBRATION" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "RL" INSTRUMENT_ID = "ROMAP" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "AUSTERETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END