/* PP calibrated power values, version 2, 2015-11-14 */

OBJECT         = COLUMN
    NAME        = "SESAME_SEQ_ID"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE        = 1
    BYTES        = 6
    UNIT        = "N/A"
    FORMAT        = "I6"
    DESCRIPTION        = "Sequence ID in the current data file"
END_OBJECT        = COLUMN

OBJECT         = COLUMN
  NAME         = "UTC"
  DATA_TYPE        = TIME
  START_BYTE        = 8
  BYTES         = 23
  DESCRIPTION        = "Measurement start time (UTC in PDS standard
     format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT        = COLUMN

OBJECT         = COLUMN
    NAME        = "SESAME_LOCAL_TIME"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE        = 32
    BYTES        = 15
    FORMAT        = "I15"
    DESCRIPTION        = "Measurement start time. SESAME local time
    (SLT) runs with a resolution of 1/32 seconds.
     SLT represents the least significant 32 bits
     of LOBT. The most significant 5 bits are in
     CDMS RSST (see SESAME Ready Message)"
END_OBJECT        = COLUMN

OBJECT         = COLUMN
    NAME        = "CENTER_FREQ"
    DATA_TYPE        = ASCII_REAL
    START_BYTE        = 48
    BYTES        = 7
    FORMAT        = "F7.1"
    UNIT        = "Hz"
    DESCRIPTION        = "Frequency bins Center Frequency +/- 1/3"
END_OBJECT        = COLUMN

OBJECT         = COLUMN
    NAME        = "VOLTAGE_DENSITY"
    DATA_TYPE        = ASCII_REAL
    START_BYTE        = 56
    BYTES        = 10
    FORMAT        = "F10.2"
    UNIT        = "<mV*(Hz**-1/2)>"
    DESCRIPTION        = "Voltage Density"
END_OBJECT        = COLUMN