PDS_VERSION_ID = PDS3 RECORD_TYPE = FIXED_LENGTH RECORD_BYTES = 2880 FILE_RECORDS = 61 ^HEADER = "LOR_0295248362_0X633_ENG.FIT" ^IMAGE = ("LOR_0295248362_0X633_ENG.FIT", 10) ^EXTENSION_HISTOGRAM_HEADER = ("LOR_0295248362_0X633_ENG.FIT", 56) ^EXTENSION_HISTOGRAM_IMAGE = ("LOR_0295248362_0X633_ENG.FIT", 57) ^EXTENSION_ENCODED_FIRST34_HEADER = ("LOR_0295248362_0X633_ENG.FIT", 58) ^EXTENSION_ENCODED_FIRST34_IMAGE = ("LOR_0295248362_0X633_ENG.FIT", 59) ^EXTENSION_IMAGE_DESCRIPTOR_HEADER = ("LOR_0295248362_0X633_ENG.FIT", 60) ^EXTENSION_IMAGE_DESCRIPTOR_IMAGE = ("LOR_0295248362_0X633_ENG.FIT", 61) NOTE = " - Earth Mean Equator and Vernal Equinox of J2000 is the inertial reference frame used to specify observational geometry. Geometric parameters are based on best available data at time of product creation. Refer to the SPICE archive for the most current observational geometry data. - All positions are relative to body centers - SC_TARGET_POSITION_VECTOR/_VELOCITY_VECTOR - TARGET wrt S/C - Light time and stellar aberration correction (per the PDS Data Dictionary) for light originating from Sun, reflected off of PLUTO and received by S/C at observation midpoint. - TARGET_SUN_POSITION_VECTOR/_VELOCITY_VECTOR - SUN wrt TARGET - Light time and stellar aberration correction (per the PDS Data Dictionary) for light originating from Sun, reflected off of SUN and received by S/C at observation midpoint. - SC_SUN_POSITION_VECTOR/_VELOCITY_VECTOR - SUN wrt S/C - Light time and stellar aberration correction (per the PDS Data Dictionary) for light originating from Sun and received by S/C at observation midpoint. - SC_EARTH_POSITION_VECTOR - EARTH wrt S/C - Light time and no stellar aberration correction (per the PDS Data Dictionary) for light reflected off of, or radiated signal originating from, Earth and received by S/C at observation midpoint. - PHASE_ANGLE - Angle between two vectors: - PLUTO target body center to Sun - PLUTO target body center to NH spacecraft - Light time and stellar aberration corrections for light leaving Sun and arriving at target center, for light that arrives at spacecraft at observation midpoint - Light time correction only, and no stellar aberration, for light leaving target center and arriving at spacecraft at observation midpoint. - SUB_SOLAR_LATITUDE - SUB_SPACECRAFT_LATITUDE - Same vectors used as for PHASE_ANGLE - IAU convention: - Positive toward Positive pole - SUB_SOLAR_LONGITUDE - SUB_SPACECRAFT_LONGITUDE - Same vectors used as for PHASE_ANGLE - IAU convention - Increasing in right-hand direction with thumb toward pole - Azimuth to Sun in FOV: - Projection of PLUTO to Sun vector (same as for PHASE_ANGLE) into instrument FOV - Positive clockwise from up - PDS3 provides no suitable keyword, here is a placeholder: NEWHORIZONS:SOLAR_FOV_AZIMUTH = 313.3 - TARGET_NAME - Note if TARGET_NAME is N/A, these parameters may be undefined. This can occur, for instance, if an instrument was performing an internal calibration. By mutual agreement with PDS-SBN, FITS headers are the domain of the NH Project and were not part of the peer review beyond adherence to the FITS standard. FITS header values, especially geometric conventions regarding phase angle, direction of supplied vectors and sense of light time and stellar aberration corrections, were chosen to serve operational purposes and should be used with care. - Keyword NEWHORIZONS:APPROX_TARGET_NAME is the best guess of the intended target of the observation made by the automated data processing pipeline. - Keywords NEWHORIZONS:APPROX_TARGET_LINE and NEWHORIZONS:APPROX_TARGET_SAMPLE provide the approximate pixel position in the image of the center of that best guess target in one-based absolute units of the PDS keywords LINES and LINE_SAMPLES, respectively, as defined in the IMAGE OBJECT of this label and in the PDS Standards Reference. The origin is dependent on the definitions of LINE_DISPLAY_DIRECTION and SAMPLE_DISPLAY_DIRECTION; if those are UP and RIGHT, respectively, then the origin is in the lower left. - If the best guess at the target is unknown, then all three keywords will be UNK i.e. unknown. If there was no target, i.e. for some instances of instrument calibration activities, the keywords will be N/A. - This image is not windowed " MISSION_NAME = "NEW HORIZONS" DATA_SET_ID = "NH-P-LORRI-2-PLUTO-V2.0" PRODUCT_ID = "LOR_0295248362_0X633_ENG" PRODUCER_INSTITUTION_NAME = "SOUTHWEST RESEARCH INSTITUTE" PRODUCT_TYPE = "EDR" MISSION_PHASE_NAME = "PLUTO ENCOUNTER" NEWHORIZONS:SEQUENCE_ID = " APLR_U_HAZARD_149_150B" NEWHORIZONS:OBSERVATION_DESC = " 4 FOOTPRINTS (2X2 MOSAIC), 6 IM PER FP. NCP+20, THEN NCP-70 " TARGET_NAME = "PLUTO" PRODUCT_CREATION_TIME = 2016-10-31T00:00:00 START_TIME = 2015-05-29T23:33:54.841 STOP_TIME = 2015-05-29T23:34:04.808 SPACECRAFT_CLOCK_CNT_PARTITION = 3 SPACECRAFT_CLOCK_START_COUNT = "0295248352:00650" SPACECRAFT_CLOCK_STOP_COUNT = "0295248361:49000" INSTRUMENT_NAME="LONG RANGE RECONNAISSANCE IMAGER" INSTRUMENT_HOST_NAME = "NEW HORIZONS" INSTRUMENT_HOST_ID = "NH" INSTRUMENT_ID = "LORRI" TELEMETRY_APPLICATION_ID = "0x633" EXPOSURE_DURATION = 9.967 DETECTOR_TYPE = "SI CCD" INST_CMPRS_TYPE = "LOSSLESS" EQUINOX_EPOCH = 2000.0 COORDINATE_SYSTEM_ID = "J2000" SC_TARGET_POSITION_VECTOR = ( 615523.61 , -52438580. , -13690565. ) SC_TARGET_VELOCITY_VECTOR = ( -0.14787901 , 13.344480 , 3.4644044 ) TARGET_CENTER_DISTANCE = 54199770. TARGET_SUN_POSITION_VECTOR = ( -1175968721.3218288 , 4447117160.5258474 , 1742249254.8325467 ) TARGET_SUN_VELOCITY_VECTOR = ( -5.3966784 , -0.79949721 , 1.3946870 ) SOLAR_DISTANCE = 4918860227.6274662 SC_SUN_POSITION_VECTOR = ( -1175404986.2008805 , 4394656999.6355972 , 1728579788.7184315 ) SC_SUN_VELOCITY_VECTOR = ( -5.5414103 , 12.545043 , 4.8607671 ) SPACECRAFT_SOLAR_DISTANCE = 4866474608.1735497 SC_EARTH_POSITION_VECTOR = ( -1232500396.1875105 , 4265762043.1235795 , 1672701257.2108316 ) SC_GEOCENTRIC_DISTANCE = 4866474608.1735497 PHASE_ANGLE = 14.8 SOLAR_ELONGATION = 165.2 SUB_SOLAR_LATITUDE = 51.4 SUB_SOLAR_LONGITUDE = 173.4 SUB_SPACECRAFT_LATITUDE = 43.2 SUB_SPACECRAFT_LONGITUDE = 191.6 RIGHT_ASCENSION = 270.6 DECLINATION = -14.7 CELESTIAL_NORTH_CLOCK_ANGLE = 249.4 BODY_POLE_CLOCK_ANGLE = 2.9 QUATERNION = ( 0.5174474412 , 0.4737484779 , 0.3294639257 , 0.6318734422 ) QUATERNION_DESC = "QUAT_AXYZ_J2K_TO_INSTR.ASC" /* See NOTE keyword above for definition of NEWH*:APPROX_TARGET_* fields */ NEWHORIZONS:APPROX_TARGET_NAME = "PLUTO" NEWHORIZONS:APPROX_TARGET_LINE = 84 NEWHORIZONS:APPROX_TARGET_SAMPLE = 75 SPICE_FILE_NAME = { "nh_pred_20060119_20070401_od020.bsp" , "nh_pred_20060119_20070101_od021.bsp" , "nh_pred_20060119_20100601_od022.bsp" , "nh_pred_20060119_20100101_od032.bsp" , "nh_pred_20061001_20100101_od040.bsp" , "nh_pred_20070307_20100101_od041.bsp" , "nh_pred_20070321_20100101_od042.bsp" , "nh_pred_20070319_20100101_od051.bsp" , "nh_pred_20070319_20110101_od059.bsp" , "nh_pred_20080710_20160101_od059.bsp" , "nh_pred_20070319_20130101_od061.bsp" , "nh_pred_20070319_20140101_od064.bsp" , "nh_pred_20070319_20150101_od070.bsp" , "nh_pred_20070319_20150501_od072.bsp" , "nh_pred_20070319_20150901_od077.bsp" , "nh_pred_20120501_20160913_od091.bsp" , "nh_pred_20150801_20190301_od124.bsp" , "nh_pred_20150801_20190901_od126.bsp" , "naif0012.tls" , "new_horizons_1430.tsc" , "nh_stars_kbo_centaur_ppinp.tpc" , "pck00010.tpc" , "nh_v220.tf" , "nh_allinstruments_v002.ti" , "nh_alice_v200.ti" , "nh_lorri_v201.ti" , "nh_pepssi_v110.ti" , "nh_ralph_v100.ti" , "nh_rex_v100.ti" , "nh_sdc_v101.ti" , "nh_swap_v200.ti" , "nh_soc_misc_v001.tf" , "sb_2002jf56_2.bsp" , "jup260.bsp" , "kbo_centaur_horizons_20131129.bsp" , "nh_extras.bsp" , "nh_stars.bsp" , "NavPE_de433_od128.bsp" , "NavSE_plu047_od123.bsp" , "nh_nep_ura_000.bsp" , "nh_recon_e2j_v1.bsp" , "nh_recon_j2sep07_prelimv1.bsp" , "nh_recon_pluto_od122_v01.bsp" , "merged_nhpc_2006_v001.bc" , "merged_nhpc_2007_v001.bc" , "merged_nhpc_2008_v001.bc" , "merged_nhpc_2009_v001.bc" , "merged_nhpc_2010_v001.bc" , "merged_nhpc_2011_v001.bc" , "merged_nhpc_2012_v001.bc" , "merged_nhpc_2013_v001.bc" , "merged_nhpc_2014_v001.bc" , "merged_nhpc_2015_v039.bc" , "merged_nhpc_2016_v003.bc" , "merged_nhpc_2017_01_v008.bc" , "nhpc_2017_032_03.bc" , "nhpc_2017_035_02.bc" , "nhpc_2017_036_02.bc" , "nhpc_2017_037_03.bc" , "nhpc_2017_039_02.bc" , "nhpc_2017_040_06.bc" , "nhpc_2017_041_04.bc" , "nhpc_2017_042_03.bc" , "nhpc_2017_043_03.bc" , "nhpc_2017_046_03.bc" , "nhpc_2017_048_02.bc" , "nhpc_2017_049_02.bc" , "nhpc_2017_050_01.bc" , "nhpc_2017_051_02.bc" , "nhpc_2017_055_02.bc" , "naif0011.tls" , "pck00010.tpc" , "nh_stars_kbo_centaur_v001.tpc" , "new_horizons_1149.tsc" , "nh_v220.tf" , "nh_soc_misc_v002.tf" , "heliospheric_v004u.tf" , "nh_alice_v200.ti" , "nh_lorri_v201.ti" , "nh_pepssi_v110.ti" , "nh_ralph_v100u.ti" , "nh_rex_v100.ti" , "nh_sdc_v101.ti" , "nh_swap_v200.ti" , "de418.bsp" , "jup260.bsp" , "nh_plu017.bsp" , "kbo_centaur_20131129.bsp" , "nh_extras.bsp" , "sb_2002jf56_2.bsp" , "sb_2014mu69_20150903_s6.bsp" , "nh_nep_ura_000.bsp" , "nh_pred_alleph_od124.bsp" , "nh_recon_e2j_v1.bsp" , "nh_recon_j2sep07_prelimv1.bsp" , "nh_recon_od077_v01.bsp" , "nh_recon_od117_v01.bsp" , "nh_recon_pluto_od122_v01.bsp" , "merged_nhpc_2006_v011.bc" , "merged_nhpc_2007_v006.bc" , "merged_nhpc_2008_v001.bc" , "merged_nhpc_2009_v001.bc" , "merged_nhpc_2010_v001.bc" , "merged_nhpc_2011_v001.bc" , "merged_nhpc_2012_v001.bc" , "merged_nhpc_2013_v001.bc" , "merged_nhpc_2014_v001.bc" , "merged_nhpc_2015_v001.bc" } OBJECT = HEADER BYTES = 25920 HEADER_TYPE = "FITS" INTERCHANGE_FORMAT = "BINARY" RECORDS = 9 DESCRIPTION = " FITS format defined in NASA/Science Office Standards Technology 100-1.0 By mutual agreement with PDS-SBN, FITS headers are the domain of the NH Project and were not part of the peer review beyond adherence to the FITS standard. FITS header values, especially geometric conventions regarding phase angle, direction of supplied vectors and sense of light time and stellar aberration corrections, were chosen to serve operational purposes and should be used with care. " END_OBJECT = HEADER OBJECT = IMAGE DESCRIPTION = " FITS PDU PDU Raw image data - 12-bit values stored in 16-bit integers " UNIT = "DATA NUMBER" SAMPLE_BITS = 16 SAMPLE_TYPE = "MSB_INTEGER" AXIS_ORDER_TYPE = "FIRST_INDEX_FASTEST" LINE_DISPLAY_DIRECTION = "UP" SAMPLE_DISPLAY_DIRECTION = "RIGHT" LINE_SAMPLES = 257 LINES = 256 OFFSET = 0.00000000000 SCALING_FACTOR = 1.00000000000 END_OBJECT = IMAGE OBJECT = EXTENSION_HISTOGRAM_HEADER BYTES = 2880 HEADER_TYPE = "FITS" INTERCHANGE_FORMAT = "BINARY" RECORDS = 1 DESCRIPTION = " This is the FITS header for FITS EDU number: 1 FITS EDU name: HISTOGRAM " END_OBJECT = EXTENSION_HISTOGRAM_HEADER OBJECT = EXTENSION_HISTOGRAM_IMAGE DESCRIPTION = " FITS EDU number: 1 HISTOGRAM Raw image data histogram - The histogram received in the lowrate telemetry - details the number of occurrences of pixels having specified pixel intensities. There are 32 histogram bins covering an intensity range of 0 to 4095, indicating that each bin represents a DN range of 128. " SAMPLE_BITS = 32 SAMPLE_TYPE = "MSB_INTEGER" AXIS_ORDER_TYPE = "FIRST_INDEX_FASTEST" LINE_DISPLAY_DIRECTION = "UP" SAMPLE_DISPLAY_DIRECTION = "RIGHT" LINE_SAMPLES = 32 LINES = 1 OFFSET = 2147483648.00 SCALING_FACTOR = 1.00000000000 END_OBJECT = EXTENSION_HISTOGRAM_IMAGE OBJECT = EXTENSION_ENCODED_FIRST34_HEADER BYTES = 2880 HEADER_TYPE = "FITS" INTERCHANGE_FORMAT = "BINARY" RECORDS = 1 DESCRIPTION = " This is the FITS header for FITS EDU number: 2 FITS EDU name: IMAGE HEADER " END_OBJECT = EXTENSION_ENCODED_FIRST34_HEADER OBJECT = EXTENSION_ENCODED_FIRST34_IMAGE DESCRIPTION = " FITS EDU number: 2 IMAGE HEADER Encoded image header - normally overlays first 34 pixels of image - Multi-byte quantities are MSByte-first - 51 bytes as follows: Count Possible x Bits Values Description 1 x 32 Unsigned integer Time tag 20 x 16 See below Analog readings 1 x 16 0 - 29,967 Exposure time (1 ms) 1 x 8 0 - 255 Calibration lamp #2 level 1 x 8 0 - 255 Calibration lamp #1 level 1 x 8 0 Spare 1 x 1 0 = Disable Dis-/Enable temperature conversion 1 = Enable 1 x 1 0 = Off Calibration lamp #2 power enable 1 = On 1 x 1 0 = Off Calibration lamp #1 power enable 1 = On 1 x 3 0 = CCD Image source 1 = FPU test pattern 1 2 = FPU test pattern 2 3 = DPU test pattern 1 4 = DPU test pattern 2 1 x 1 0 = 1x1 Image format 1 = 4x4 1 x 1 0 = Manual Exposure mode 1 = Automatic 1 x 8 0 Spare Analog readings (LVPS/0 - /15 & FPU/0 -/3): 1 x 16 0 - 1023 EPU +5 voltage 1 x 16 0 - 1023 EPU +5 current 1 x 16 0 - 1023 FPU +15 voltage 1 x 16 0 - 1023 FPU +15 current 1 x 16 0 - 1023 FPU +6 voltage 1 x 16 0 - 1023 FPU +6 current 1 x 16 0 - 1023 FPU heater current 1 x 16 0 - 1023 EPU +2.5 voltage 1 x 16 0 - 1023 Intermediate ring temperature 1 x 16 0 - 1023 Mounting foot-top temperature 1 x 16 0 - 1023 M2 mirror mount temperature 1 x 16 0 - 1023 Radiator temperature 1 x 16 0 - 1023 Baffle-aft temperature 1 x 16 0 - 1023 Baffle-forward temperature 1 x 16 0 - 1023 M1 mirror support temperature 1 x 16 0 - 1023 M1 mirror temperature 1 x 16 0 - 4095 CCD temperature 1 x 16 0 - 65535 M1 V/F temperature 1 x 16 0 - 65535 M2 V/F temperature 1 x 16 0 - 65535 FPU board V/F temperature " SAMPLE_BITS = 8 SAMPLE_TYPE = "MSB_UNSIGNED_INTEGER" AXIS_ORDER_TYPE = "FIRST_INDEX_FASTEST" LINE_DISPLAY_DIRECTION = "UP" SAMPLE_DISPLAY_DIRECTION = "RIGHT" LINE_SAMPLES = 51 LINES = 1 END_OBJECT = EXTENSION_ENCODED_FIRST34_IMAGE OBJECT = EXTENSION_IMAGE_DESCRIPTOR_HEADER BYTES = 2880 HEADER_TYPE = "FITS" INTERCHANGE_FORMAT = "BINARY" RECORDS = 1 DESCRIPTION = " This is the FITS header for FITS EDU number: 3 FITS EDU name: IMAGE DESCRIPTOR " END_OBJECT = EXTENSION_IMAGE_DESCRIPTOR_HEADER OBJECT = EXTENSION_IMAGE_DESCRIPTOR_IMAGE DESCRIPTION = " FITS EDU number: 3 IMAGE DESCRIPTOR Image descriptor - Multi-byte quantities are MSByte-first - 174 bytes as follows: Count Possible x Bits Values Description 20 x 16 See below Analog readings 1 x 16 0 - 29,967 Exposure time (1 ms) 1 x 8 0 - 255 Calibration lamp #2 level 1 x 8 0 - 255 Calibration lamp #1 level 1 x 8 0 Spare 1 x 1 0 = Disable Dis-/Enable temperature conversion 1 = Enable 1 x 1 0 = Off Calibration lamp #2 power enable 1 = On 1 x 1 0 = Of Calibration lamp #1 power enablef 1 = On 1 x 3 0 = CCD Image source 1 = FPU test pattern 1 2 = FPU test pattern 2 3 = DPU test pattern 1 4 = DPU test pattern 2 1 x 1 0 = 1x1 Image format 1 = 4x4 1 x 1 0 = Manual Exposure mode 1 = Automatic 32 x 32 Unsigned integer Image histogram Analog readings (LVPS/0 - /15 & FPU/0 -/3): 1 x 16 0 - 1023 EPU +5 voltage 1 x 16 0 - 1023 EPU +5 current 1 x 16 0 - 1023 FPU +15 voltage 1 x 16 0 - 1023 FPU +15 current 1 x 16 0 - 1023 FPU +6 voltage 1 x 16 0 - 1023 FPU +6 current 1 x 16 0 - 1023 FPU heater current 1 x 16 0 - 1023 EPU +2.5 voltage 1 x 16 0 - 1023 Intermediate ring temperature 1 x 16 0 - 1023 Mounting foot-top temperature 1 x 16 0 - 1023 M2 mirror mount temperature 1 x 16 0 - 1023 Radiator temperature 1 x 16 0 - 1023 Baffle-aft temperature 1 x 16 0 - 1023 Baffle-forward temperature 1 x 16 0 - 1023 M1 mirror support temperature 1 x 16 0 - 1023 M1 mirror temperature 1 x 16 0 - 4095 CCD temperature 1 x 16 0 - 65535 M1 V/F temperature 1 x 16 0 - 65535 M2 V/F temperature 1 x 16 0 - 65535 FPU board V/F temperature " SAMPLE_BITS = 8 SAMPLE_TYPE = "MSB_UNSIGNED_INTEGER" AXIS_ORDER_TYPE = "FIRST_INDEX_FASTEST" LINE_DISPLAY_DIRECTION = "UP" SAMPLE_DISPLAY_DIRECTION = "RIGHT" LINE_SAMPLES = 174 LINES = 1 END_OBJECT = EXTENSION_IMAGE_DESCRIPTOR_IMAGE END