PDS_VERSION_ID = PDS3 RECORD_TYPE = FIXED_LENGTH RECORD_BYTES = 118 FILE_RECORDS = 2049 ^HEADER = ("ESA_RPA_V16_ENERGY_BINSF_NEW.TAB" , 1) ^TABLE = ("ESA_RPA_V16_ENERGY_BINSF_NEW.TAB" , 2) MISSION_NAME = "NEW HORIZONS" DATA_SET_ID = "NH-J-SWAP-2-JUPITER-V4.0" PRODUCT_ID = "ESA_RPA_V16_ENERGY_BINSF_NEW.TAB" PRODUCER_INSTITUTION_NAME = "SOUTHWEST RESEARCH INSTITUTE" PRODUCT_CREATION_TIME = 2014-06-12T00:00:00 INSTRUMENT_NAME = "SOLAR WIND AROUND PLUTO" INSTRUMENT_ID = "SWAP" INSTRUMENT_HOST_NAME = "NEW HORIZONS" OBJECT = HEADER HEADER_TYPE = TEXT BYTES = 118 DESCRIPTION = "Column headers for the TABLE OBJECT." END_OBJECT = HEADER OBJECT = TABLE INTERCHANGE_FORMAT = ASCII ROWS = 2048 COLUMNS = 11 ROW_BYTES = 118 NAME = "ENERGY BINS TABLE V 16" DESCRIPTION = "This table provides pre-calculated energies for calibrating SWAP raw real-time data. The pre-calculated energies apply to energy bins of observed data based on voltages in voltage table Version 16. Use the PLAN_ID, SWEEP_ID, ESA_LVL0 and RSA_LVL0 of a row in an observed real-time (raw) count rate measurement file as a lookup to match the PLAN_ID, SWEEP_ID, ESA_DAC, and RPA_DAC, respectively, columns in this table to select the row in this table that determines the nominal energy of solar wind that was focused by the SWAP electro-optics onto the counters to generate the counts in the first half-second represented by that row in the raw data. Do the same with PLAN_ID, SWEEP_ID, ESA_LVL1 and RSA_LVL1 to get the nominal energy for the counts in the second half-second of that row. Refer to the table LIST_ENERGY_FILES.LBL and .TAB for the application times of the calibration data in this table. It is the responsiblity of the PDS user to check for later SWAP data sets to determine the if application times of the calibration data in this table have changed, or if there are new calibration data. " OBJECT = COLUMN NAME = "PLAN_ID" START_BYTE = 1 BYTES = 8 COLUMN_NUMBER = 1 DATA_TYPE = ASCII_INTEGER UNIT = COUNT FORMAT = "I8" DESCRIPTION = "PLAN ID for the row, to match the PLAN_ID value in an observed count rate measurement. " END_OBJECT = COLUMN OBJECT = COLUMN NAME = "SWEEP_ID" START_BYTE = 9 BYTES = 8 COLUMN_NUMBER = 2 DATA_TYPE = ASCII_INTEGER FORMAT = "I8" UNIT = COUNT DESCRIPTION = "SWEEP ID for the row, to match the SWEEP_ID value in an observed count rate measurement. " END_OBJECT = COLUMN OBJECT = COLUMN NAME = "ESA_DAC" START_BYTE = 17 BYTES = 8 COLUMN_NUMBER = 3 DATA_TYPE = ASCII_INTEGER FORMAT = "I8" UNIT = COUNT DESCRIPTION = "ESA_DAC counts for the row, to match the ESA_LVL0 or ESA_LVL1 count value in an observed count rate measurement. " END_OBJECT = COLUMN OBJECT = COLUMN NAME = "RPA_DAC" START_BYTE = 25 BYTES = 8 COLUMN_NUMBER = 4 DATA_TYPE = ASCII_INTEGER FORMAT = "I8" UNIT = COUNT DESCRIPTION = "RSA_DAC counts for the row, to match the RSA_LVL0 or RSA_LVL1 count value in an observed count rate measurement. " END_OBJECT = COLUMN OBJECT = COLUMN NAME = "VESA" START_BYTE = 33 BYTES = 12 COLUMN_NUMBER = 5 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = VOLT DESCRIPTION = "ESA_DAC voltage for the row." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "VRPA" START_BYTE = 45 BYTES = 12 COLUMN_NUMBER = 6 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = VOLT DESCRIPTION = "RSA_DAC voltage for the row." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "CROSSING" START_BYTE = 57 BYTES = 12 COLUMN_NUMBER = 7 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = "VOLT / EV" DESCRIPTION = "Number related to ratio of RSA voltage to ESA Center energy. This is not an exact ratio of any two values in this row. This value is not used in any part of data calibration, and may be ignored." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "EPEAK" START_BYTE = 69 BYTES = 12 COLUMN_NUMBER = 8 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = EV DESCRIPTION = "Energy, eV, peak response for the row." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "WIDTH" START_BYTE = 81 BYTES = 12 COLUMN_NUMBER = 9 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = EV DESCRIPTION = "Energy width (Full Width at Half Maximum, FWHM), eV, for the row." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "MIN_E" START_BYTE = 93 BYTES = 12 COLUMN_NUMBER = 10 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = EV DESCRIPTION = "Minimum energy, eV, for the row." END_OBJECT = COLUMN OBJECT = COLUMN NAME = "MAX_E" START_BYTE = 105 BYTES = 12 COLUMN_NUMBER = 11 DATA_TYPE = ASCII_REAL FORMAT = "F12.4" UNIT = EV DESCRIPTION = "Maximum energy, eV, for the row." END_OBJECT = COLUMN END_OBJECT = TABLE END