PDS_VERSION_ID = PDS3
RECORD_TYPE = "FIXED_LENGTH"
RECORD_BYTES = 2880
FILE_RECORDS = 4
^FITS_HEADER = "HRIVIS_071004_1_3.FIT"
^ARRAY = ("HRIVIS_071004_1_3.FIT", 2)
DATA_SET_ID = "DIF-X-HRIV-3-EPOXI-EXOPLANETS-V1.0"
MISSION_NAME = "EPOXI"
INSTRUMENT_HOST_NAME = "DEEP IMPACT FLYBY SPACECRAFT"
INSTRUMENT_HOST_ID = "DIF"
INSTRUMENT_NAME = "DEEP IMPACT HIGH RESOLUTION INSTRUMENT
- VISIBLE CCD"
INSTRUMENT_ID = "HRIV"
PRODUCT_ID = "XTALK_HRIVIS_071004_1_3-200901"
PRODUCT_NAME = "HRIV CROSSTALK CORRECTION MODE 3"
PRODUCT_CREATION_TIME = 2009-01-08T00:00:00
START_TIME = 2007-10-04T00:00:00
STOP_TIME = "UNK"
SPACECRAFT_CLOCK_START_COUNT = "N/A"
SPACECRAFT_CLOCK_STOP_COUNT = "N/A"
FILTER_NAME = "N/A"
FILTER_NUMBER = "N/A"
TARGET_NAME = "N/A"
INSTRUMENT_MODE_ID = 3
NOTE = "The Primary Data Unit (PDU) of this
FITS-format file is a 3D data cube comprising coefficients of polynomials
specifying how much crosstalk occurs between all possible ordered pairs
of quadrants of an input HRIVIS image. Indices of the first two
dimensions (axes NAXIS1 and NAXIS2 in FITS or SAMPLE and LINE in this PDS
label) specify to which ordered pair of quadrants the coefficients at
those indices apply. The values in Column J (NAXIS1 or SAMPLE), row I
(NAXIS2 or LINE) in this data cube are the coefficients of a polynomial
which specifies the crosstalk gain from input HRIVIS image quadrant J
onto quadrant I. Details of the quadrant numbering convention are below.
The indices of the last dimension (axis NAXIS3 in FITS or
LINEAR_COEFFICIENT in this PDS label) indicate the exponent to apply to
that J quadrant value before multiplying by the coefficient at that
index. The first index of dimension NAXIS3 (i.e., the axis named
LINEAR_COEFFICIENT in the ARRAY object defined in this PDS label)
specifies the offset (exponent 0), the next index specifies the linear
coefficient (exponent 1), and so on. At the time these comments were
first written, all crosstalk polynomials have only two coefficients, and
all offset (exponent 0) values are zero.
In addition to the coefficients in the PDU, the FITS Primary Header Data
Unit (PHDU) has keywords XSjOVERi (e.g. XS2OVER1) which contain the X
(column) shift to apply to input HRIVIS image quadrant J before
subtracting the calculated crosstalk from quadrant I. In those keywords,
j and i are 1-based quadrant numbers, and the X-shifts for the cases
where I=J are not included. Finally, the presence of keyword XSHIFTOK
with logical value T is a convention to indicate the presence of the
XSjOVERi keywords. The shift values from the PHDU are copied here
for reference:
XSHIFTOK= T / Use XSHIFT[N,N] values from this header
XS2OVER1= -1 / XSHIFT for quadrant 2 over quadrant 1
XS3OVER1= 1 / XSHIFT for quadrant 3 over quadrant 1
XS4OVER1= 0 / XSHIFT for quadrant 4 over quadrant 1
XS1OVER2= 1 / XSHIFT for quadrant 1 over quadrant 2
XS3OVER2= 1 / XSHIFT for quadrant 3 over quadrant 2
XS4OVER2= -1 / XSHIFT for quadrant 4 over quadrant 2
XS1OVER3= 1 / XSHIFT for quadrant 1 over quadrant 3
XS2OVER3= -1 / XSHIFT for quadrant 2 over quadrant 3
XS4OVER3= -1 / XSHIFT for quadrant 4 over quadrant 3
XS1OVER4= 1 / XSHIFT for quadrant 1 over quadrant 4
XS2OVER4= -1 / XSHIFT for quadrant 2 over quadrant 4
XS3OVER4= 1 / XSHIFT for quadrant 3 over quadrant 4
The quadrant numbering convention starts at the top left, next is top
right. If this a VIS instrument, the next is bottom left, and finally
bottom right. This convention, which assumes the data in HRIVIS images
are stored from left to right and from bottom to top with increasing
NAXIS1 and NAXIS2, respectively, are laid out in the following diagrams:
+---+---+ +---+---+ +---+---+
| 0 | 1 | | 1 | 2 | | A | B |
+---+---+ +---+---+ +---+---+
| 2 | 3 | | 3 | 4 | | C | D |
+---+---+ +---+---+ +---+---+
Quadrant numbering
or naming convention: 0-based 1-based alpha-based
N.B. The ABCD convention applies only to these crosstalk gains and
is not the same convention as is used in, for example, Deep
Impact instrument calibration publications.
"
OBJECT = FITS_HEADER
HEADER_TYPE = "FITS"
BYTES = 2880
RECORDS = 1
INTERCHANGE_FORMAT = "BINARY"
DESCRIPTION = "
FITS format is defined in NASA/Science Office Standards
Technology 100-1.0."
END_OBJECT = FITS_HEADER
OBJECT = ARRAY
NAME = "XTALK_CORRECTION_BY_QUADRANT"
INTERCHANGE_FORMAT = "BINARY"
AXES = 3
AXIS_ITEMS = (4,4,2)
AXIS_NAME = ("SAMPLE", "LINE", "LINEAR_COEFFICIENT")
AXIS_ORDER_TYPE = "FIRST_INDEX_FASTEST"
START_BYTE = 2881
OBJECT = ELEMENT
DATA_TYPE = "IEEE_REAL"
BYTES = 8
NAME = "XTALK LINEAR COEFFICIENT"
END_OBJECT = ELEMENT
END_OBJECT = ARRAY
END