DIF-C-HRII-2-EPOXI-ISON-V1.0      Raw Data
DIF-C-HRII-3/4-EPOXI-ISON-V1.0    Calibrated and Resampled Data

Review Result: Certified.

Symbol Key:
  o = Lien open
  x = Lien resolved or closed
  ! = Lien rejected or declined
  + = Comments (by SMcLaughlin unless otherwise indicated)   

Catalog
=======
! In the dataset.cat file description, please add full citations to the
  Calibration papers (i.e., as footnotes in the text & in addition to the 
  REFERENCE objects that also exist).
+ Not implemented.  On 22 March, M.A'Hearn agreed with S.McLaughlin's 
  recommendation to reject this lein.  It is redundant to the the full 
  citation already in the ref.cat files.

x There needs to be a reference to the source of the pole definition for 
  Garradd and ISON in some appropriate place.  [Note that the SPICE kernels 
  likely involved have not been reviewed.]
+ Done.
  
! There is a known issue with a solar flare that significantly affects data 
  on a particular date.  This should be noted in the data set descriptions 
  for all affected data sets.
+ Rejected. Not applicable to this HRII dataset.
  
x In dataset.cat. the CITATION_DESC year must be '2014' since 
  this is when the data were reviewed and released to the public.
+ Done.
  
x In the dataset.cat DESCRIPTION, the description of the scanning process
  is confusing and needs to be re-worded.
+ Done.  The same scanning technique was used for Garradd, which is
  described in more detail by Feaga, et al. (2014).  Added reference to
  FEAGAETAL2014 to dataset.cat.

Documents
=========
x Ensure these data sets have the latest versions of these document files:
    day_of_year_calendar.lbl
    epoxi_cal_pipeline_summ.lbl
    epoxi_sis.lbl
    instruments_hampton.lbl
    pdsdd_epoxi.lbl
    quaternion_desc.lbl
+ Done. 
 
x In epoxi_sis.pdf:
  x This document says labels for HRIV, MRI, and ITS level 3/4 data, PDS keyword
    PROCESSING_HISTORY_TEXT contain
      FLAT_PRO=
      FLATCONS=
      FLATTEMP=
      CALWINDW=
      CALWINPY=
    but the sample labels in the SIS's 4.4.4.1 and 4.4.4.2 do not.
  x p. 27: "DIF-L-HRII-3_4-EPOXI-LUNAR-CALS-V1.0" should have a / not a _
    i.e.   "DIF-L-HRII-3/4-EPOXI-LUNAR-CALS-V1.0"
  x epoxy_sis.pdf pages 47-9 the figures are misaligned with the text.  This 
    needs to be corrected in every copy of the document in all data sets.
+ Done, except for the item about PROCESSING_HISTORY_TEXT. That PDS keyword
  will contain different processing keywords because the calibration pipeline 
  performs different steps for the VIS HRIV, MRI, and ITS CCDs and the IR
  spectrometer.  For example, the FITS header keywords FLAT_PRO, FLATCONS, 
  FLATTEMP, CALWINDW, & CALWINPY only apply to IR calibration, so those values
  are never included in PROCESSING_HISTORY_TEXT.  However, we noted this
  difference in the description of PROCESSING_HISTORY_TEXT in the SIS.
  For last item, had to print the Word file as a Postscript to force alignment
  of figure pieces with text, then distilled the Postscript to PDF/A.
    
x There are summary files with names like hriv_3_4_epoxi_garrad.pdf.  In at 
  least some of these labels in some data sets, the Julian Date field is 
  described as being in the form YYYYMMDD.  This needs to be fixed if it
  applies to this data set.
+ Done.
 
x The BODY_POSITIVE_POLE_CLOCK_ANGLE or whatever it is called, is stated to 
  an unrealistic degree of precisicion for comets Garradd and ISON.  It 
  should certainly not be stated in these data to more accuracy than integer 
  degrees.  But in the document directory the table that lists geometry gives 
  the same clock angle for this value as for the celestial north clock angle.  
  If the value is not applicable, or otherwise unknown/unknowable, then the 
  appropriate constant needs to be defined and used.
+ Done.  BODY_POSITIVE_POLE_CLOCK_ANGLE is not really known for comet
  Garradd and ISON.  Project revised data labels and geometry tables to
  use an appropriate value unknown.

x In places that describe the file naming convention, there needs to be a 
  clear indication of which time (beginning, middle, end) is used for 
  creating the file name.
+ Not applicable.  Mid-obs is used in the filenames and for grouping products 
  into DOY directories, and this is already called out in the EPOXI SIS and
  dataset.cat files!  
  
x Please add a document equivalent to the "observing log" files found in 
  other DI/EPOXI data sets listing comet centroids, image quality, known
  anomalies, and so on.
+ Done.  Project provided a table of measured centroid.  "Observing logs"
  were not prepared by the project because these obs were not from an actual
  flyby.